QUESTION???

[brandy kaiser 20]

HOW DO YOU KNOW WHEN THE AGP WGA HAS GONE BAD. IT SEEMS LIKE MINE WENT OUT BECAUSE I HAVE IT ADJUSTED TO THE MAX AND WITH THE BLEED AND ITS ONLY PUSHING OUT ABOUT 14 PSI PRETTY MUCH LIKE STOCK.

[noTe]

HOW DO YOU KNOW WHEN THE AGP WGA HAS GONE BAD. IT SEEMS LIKE MINE WENT OUT BECAUSE I HAVE IT ADJUSTED TO THE MAX AND WITH THE BLEED AND ITS ONLY PUSHING OUT ABOUT 14 PSI PRETTY MUCH LIKE STOCK.

Could you please take your caps lock off for future posts please? Thanks.

As for the question: You shouldn't adjust the wastegate to max boost because you'll break the arm on it. As for the bleed, I don't recommend using a bleed.. so someone who has experience with a bleed with have to help you concerning that.

[punkrokdood]

are you using the stock lines? if so, then the computer is still controlling boost, and probaby dropped the boost since the air is getting cooler.

if your WGA is broken, then depending on how its broken, you'll get either 0 psi or like 30 psi