Log in

View Full Version : nick's turbo 1st gen


3rdgenguy
03-02-2017, 09:12 PM
http://pic2.picturetrail.com/VOL965/3750481/7789106/122745973.jpg
http://pic2.picturetrail.com/VOL965/3750481/7737929/131569335.jpg
http://pic2.picturetrail.com/VOL965/3750481/7737929/131569189.jpg
http://pic2.picturetrail.com/VOL965/3750481/7737929/131569187.jpg
http://pic2.picturetrail.com/VOL965/3750481/7737929/131569185.jpg

http://pic2.picturetrail.com/VOL965/3750481/7737929/131568857.jpg
http://pic2.picturetrail.com/VOL965/3750481/7737929/131568537.jpg
http://pic2.picturetrail.com/VOL965/3750481/7737929/131568531.jpg



95 sohc neon its getting a brand new ported stock srt turbo .. what a stupid little beater car this is going to be :jester:

SassySRT
03-02-2017, 09:13 PM
Go lil first gen!!!! :lol:

gspeedaddict
03-02-2017, 09:14 PM
sleeper mmmmmm

3rdgenguy
03-02-2017, 09:17 PM
sleeper mmmmmm
the sad fact is i got all this shit for under 1K brand new ported turbo 02 houseing injectors gutted PT DP heat shield coolant and oil lines $200
stock srt fmic 10 k miles $40 boost gauge 40 adapter plate 200 bucks agp return line kit with riseing rate fuel pressure regulator $330

MSMoores
03-02-2017, 09:19 PM
I see my arch nemesis, the 02 housing.

3rdgenguy
03-02-2017, 09:19 PM
only going to be able to run no more the 10 psi boost though

3rdgenguy
03-02-2017, 09:19 PM
I see my arch nemesis, the 02 housing.
thoes are a bitch to change on the srt

3rdgenguy
03-02-2017, 09:20 PM
and the 1st gen is 600 lbs lighter then the srt

punkrokdood
03-02-2017, 09:21 PM
10 psi will do a lot to that car :thumb:

i lost to an early 2nd gen R/T with a 100shot at the track last weekend... then again, i lose to everyone :lol:

el_jefe
03-03-2017, 08:43 AM
You buy the oil lines new? How much did they cost, I can't find em used. I am missing that, fuel pump, RRFPR and intercooler piping for Project:Wife Beater (http://www.cardomain.com/ride/2230622)

Broken5hift
03-03-2017, 08:57 AM
HAHAHAHAHA sick. i hate green cars though

3rdgenguy
03-03-2017, 04:51 PM
You buy the oil lines new? How much did they cost, I can't find em used. I am missing that, fuel pump, RRFPR and intercooler piping for Project:Wife Beater (http://www.cardomain.com/ride/2230622)
i have someone on the inside of a certain auto manufacture (sp)


total cost for oil and coolant lines:
freebe zip zero nada :thumb:

el_jefe
03-03-2017, 04:55 PM
I got my IC for free. I have a contact with the auto manufactures too. . . just not DCX. Not current DCX anyway :sneaky:

3rdgenguy
03-03-2017, 11:07 PM
the lines are from a caliber but shhhhhhhhhhhh

3rdgenguy
03-12-2017, 10:24 PM
http://pic2.picturetrail.com/VOL965/3750481/9359932/133052043.jpg

my agp rrfpr W00T

Intruudir
03-12-2017, 10:28 PM
Please keep us posted on your progress and how things are going at the track after you complete the project....Good Job!

3rdgenguy
03-12-2017, 11:05 PM
going together next weekend when i get time hopefully will be done in 1-2 days

jhempstead
03-14-2017, 09:56 PM
Keep us updated! :thumb:

DJ2
03-14-2017, 10:00 PM
should be quick when it's done

3rdgenguy
04-16-2017, 01:35 PM
http://pic2.picturetrail.com/VOL965/3750481/7737929/139690844.jpg
http://pic2.picturetrail.com/VOL965/3750481/7737929/139714630.jpg
http://pic2.picturetrail.com/VOL965/3750481/7737929/139485487.jpg

got it finished a few weeks ago.... lasted about 2 weekends then the old sohc'er said see yea :rofl: orderd some turbo internals through modern performance got it running agin .. i just need to get the fmic up higher. 7" off the ground is so far cleared speedbumps railroad tracks and downtown toledo ..

3rdgenguy
04-16-2017, 01:36 PM
next up ATX to go kaaablamooooo

uberingram
04-16-2017, 01:47 PM
Sweet. Your SRT boost gauge came broken just like our stock ones. Go figure.

StangsRkewl
04-16-2017, 01:47 PM
i <3 sleepers

any numbers out of it yet? dyno or track?

3rdgenguy
04-16-2017, 01:54 PM
i <3 sleepers

any numbers out of it yet? dyno or track?
not yet ..though i can power brake the car and leave @5psi which lights the tires up like no ones business ... to bad my car governs out at 118mph seems like it gets there quicker :rofl:

3rdgenguy
04-16-2017, 01:58 PM
http://pic2.picturetrail.com/VOL965/3750481/7737929/138692180.jpg
http://pic2.picturetrail.com/VOL965/3750481/7737929/138473796.jpg

el_jefe
04-16-2017, 03:31 PM
not yet ..though i can power brake the car and leave @5psi which lights the tires up like no ones business ... to bad my car governs out at 118mph seems like it gets there quicker :rofl:


Unfortunately, the Mopar PCM's do bad things to the timing for turbos, from what I am told. I will find out soon, unless I go with a VEMS stand alone on mine.

uberingram
04-16-2017, 03:32 PM
Unfortunately, the Mopar PCM's do bad things to the timing for turbos, from what I am told. I will find out soon, unless I go with a VEMS stand alone on mine.
Thoughts on MegaSquirt? Just curious.

el_jefe
04-16-2017, 03:42 PM
I am looking at that to, but VEMS can control timing to, and is open source. Not sure if anyone has run it on a first gen though. Megasquirt has been done, and it would be less than a return line setup. More tuning though, so it's a trade off.

uberingram
04-16-2017, 03:59 PM
Ever troll over at msefi.com?

If I had the time and resources I would so be on top of this.

el_jefe
04-16-2017, 05:42 PM
It's the time that gets me, I have none. Plus I need to put a new engine in the truck so we would have a backup car. I don't see getting the turbo installed and tuned over a weekend. :rofl:

3rdgenguy
04-30-2017, 10:37 PM
:ftard: http://pic2.picturetrail.com/VOL965/3750481/7737929/141420705.jpg
http://pic2.picturetrail.com/VOL965/3750481/7737929/141420793.jpg

forgot about this thread updated now

|