Log in

View Full Version : New Knob!!!!!...looks like stock knob but way heavier..


svt2srt4
03-03-2019, 05:33 PM
check it out and tell me what you think...it weighs about 1.25 lbs and is made completely of stainless ...please vote also:thumb:
if you want this knob see this thread:..
/showthread.php?t=3032
http://teamgreenracing.mypicgallery.com/braggingrights/dcp-2941_large.jpghttp://teamgreenracing.mypicgallery.com/braggingrights/dcp-2943_large.jpghttp://teamgreenracing.mypicgallery.com/braggingrights/dcp-2944_large.jpg
http://teamgreenracing.mypicgallery.com/braggingrights/dcp-2945_large.jpghttp://teamgreenracing.mypicgallery.com/braggingrights/dcp-2946_large.jpg

punkrokdood
03-03-2019, 05:37 PM
dammit dammit dammit dammit dammit

i want that one instead :gcry:

slow4dr
03-03-2019, 05:40 PM
dammit dammit dammit dammit dammit

i want that one instead :gcry:


X's 2 :gcry:

svt2srt4
03-03-2019, 05:46 PM
i love this one...i just put it on my car it shift the gears all by its self and im sure if i spend some time with it i can teach it to drive the car for me:rofl:...but no really its heavy as hell, a slight nudge and it falls into gear by itself..:thumb:

MSMoores
03-03-2019, 05:47 PM
X's 2 :gcry:

X 3

svt2srt4
03-03-2019, 05:50 PM
so what are you guys going to do with the other knobs you bought when you buy this one:owned:

MSMoores
03-03-2019, 05:50 PM
so what are you guys going to do with the other knobs you bought when you buy this one:owned:

...paperweights.



j/k j/k j/k !!!1!11 <3

punkrokdood
03-03-2019, 05:53 PM
maybe you should devise a way to make something like the ball one screw onto the old one :thumb:

MSMoores
03-03-2019, 05:57 PM
If this one is SRT specific, I'll ebay the other one and buy this one.

zooey
03-03-2019, 06:05 PM
fucker..............:angryfire



How much is this one gonna be?

svt2srt4
03-03-2019, 06:08 PM
If this one is SRT specific, I'll ebay the other one and buy this one.
if i see that knob on ebay, you wont be seeing any thing from me brudda....ill kill you jihad durka durka :banned:

PolarBear
03-03-2019, 06:13 PM
nice and shiny, but without the pattern engraved, I might forget it's not a 6 speed and slam into reverse:ftard:

seriously you doin' any detail engraving/etching work to it at any point?

svt2srt4
03-03-2019, 06:16 PM
nice and shiny, but without the pattern engraved, I might forget it's not a 6 speed and slam into reverse:ftard:

seriously you doin' any detail engraving/etching work to it at any point?
it would cost more and i would need at least 10 people want a engraved one and they would have to say the same thing or it would cost way too much...im thinking $50 for and egraved version with a srt logo or something to that fact ...but if enough people are not intrested it wont happen...:thumb:

PolarBear
03-03-2019, 06:18 PM
it would cost more and i would need at least 10 people want a engraved one and they would have to say the same thing or it would cost way too much...im thinking $50 for and egraved version with a srt logo or something to that fact ...but if enough people are not intrested it wont happen...:thumb:

but with the logo, gosh golly gee that makes me horny...could you at least photochop what your srt logo idea would look like....

svt2srt4
03-03-2019, 06:21 PM
but with the logo, gosh golly gee that makes me horny...could you at least photochop what your srt logo idea would look like....
no, can you?:owned:

PolarBear
03-03-2019, 06:23 PM
no, can you?:owned:

photochop>polarbear.....I don't have it...

Is this your version of the M1 tankashit, only this actually will fit our stocker?

svt2srt4
03-03-2019, 06:28 PM
photochop>polarbear.....I don't have it...

Is this your version of the M1 tankashit, only this actually will fit our stocker?
this one is better cus it fits our car perfectly no adapters needed and its only 1/4 the price w/shipping included...and its the exact same siza as the stocker so no change of feel in the grip just straight solid and heavy as shit:thumb:

poorwboy
03-03-2019, 06:35 PM
this one is better cus it fits our car perfectly no adapters needed and its only 1/4 the price w/shipping included...and its the exact same siza as the stocker so no change of feel in the grip just straight solid and heavy as shit:thumb:
Can I change my order now.:lol:

MSMoores
03-03-2019, 06:36 PM
Well the good news is my little brother is gonna buy the shifter with the compartment off me for the other SRT. Now i'm free and clear to give you more of my hard earned money.

Between this and never having been to Israel, I'm worried that Tom and Philly are going to kick me out of Judaism. :sad:

svt2srt4
03-03-2019, 06:37 PM
Can I change my order now.:lol:
you fawker i knew that was coming...:rofl: :rofl:

svt2srt4
03-03-2019, 06:38 PM
Well the good news is my little brother is gonna buy the shifter with the compartment off me for the other SRT. Now i'm free and clear to give you more of my hard earned money.

Between this and never having been to Israel, I'm worried that Tom and Philly are going to kick me out of Judaism. :sad:
i want to be joo too...they some rich money grubbin fawkers...:stupid:

poorwboy
03-03-2019, 06:39 PM
you fawker i knew that was coming...:rofl: :rofl:
You should of waited for this thread.:rofl: That round one is badass.:thumb:

MSMoores
03-03-2019, 06:39 PM
joo is *our* word.

svt2srt4
03-03-2019, 06:42 PM
You should of waited for this thread.:rofl: That round one is badass.:thumb:
you already paid so i might hold off on making your other knob if you want to wait on this one:thumb: although im not sure when these other ones will be ready:ftard:

liteshow
03-03-2019, 06:46 PM
As nice as they are I won't buy one. :)
But good luck to ya anyways.
http://www.dodgegallery.com/liteshow/csc%20-%20pix/knobs/polished.JPG

poorwboy
03-03-2019, 06:54 PM
you already paid so i might hold off on making your other knob if you want to wait on this one:thumb: although im not sure when these other ones will be ready:ftard:
Go ahead and make the one I paid for. Then I can try them both.:thumb:

gspeedaddict
03-03-2019, 06:55 PM
Nice!

PolarBear
03-03-2019, 07:32 PM
Until I make up my friggin' mind on an sts, I voted no, for now..you can put your ball on my shaft anytime,,,,er, I mean I really respect how you made one for us, not just that will fit only your own shaft :thumb: :thumb:

SassySRT
03-03-2019, 07:56 PM
I want one!!!!

svt2srt4
03-03-2019, 09:06 PM
I want one!!!!
do you?...some crappy cell phone pics...
http://teamgreenracing.mypicgallery.com/braggingrights/v03mar2019-002_large.jpghttp://teamgreenracing.mypicgallery.com/braggingrights/v03mar2019-003_large.jpghttp://teamgreenracing.mypicgallery.com/braggingrights/v03mar2019-001_large.jpg

OWN3D
03-04-2019, 05:50 AM
How is it held in place????

Intruudir
03-04-2019, 07:33 AM
http://www.modernperformance.com/dcx/srt_style_shiftknob.shtml

Looks Good, ...however

The modern performance shift ball is 45.00 plus 5.00 for shipping..their ball comes ingraved with the regular shift pattern on the top of it and it has an "inner ring" that fits perfectly on the stock SRT-4 gear shift lever and then that ring is tightend by several small set screws for even pressure around the whole ring. - The shift ball itself then screws onto the ring as it is threaded on the outside portion of it....A perfect snug fit.

Your product looks good...but I imagine you would have to sell it at a significantly lower price then an already proven product....IMO

liteshow
03-04-2019, 01:03 PM
Mines only held in by one screw.

punkrokdood
03-04-2019, 01:22 PM
if you get one set screw that goes in at an angle to catch the little notch in the stock rod, it will hold just fine :thumb:

svt2srt4
03-04-2019, 05:45 PM
http://www.modernperformance.com/dcx/srt_style_shiftknob.shtml

Looks Good, ...however

The modern performance shift ball is 45.00 plus 5.00 for shipping..their ball comes ingraved with the regular shift pattern on the top of it and it has an "inner ring" that fits perfectly on the stock SRT-4 gear shift lever and then that ring is tightend by several small set screws for even pressure around the whole ring. - The shift ball itself then screws onto the ring as it is threaded on the outside portion of it....A perfect snug fit.

Your product looks good...but I imagine you would have to sell it at a significantly lower price then an already proven product....IMO
first of all thats an aluminum shift knob , mine is solid stainless steel(way heavier then that POS) second of all mine is $40 shipped without engraving and about The exact same price with engraving (not the stupid shift pattern but a SRT logo or something) 3rd my knob is made by me and im proud of that fact not some second rate machine shop paid for by the hundreds...if you like there knob so much then fine go buy it:thumb:

liteshow
03-04-2019, 06:39 PM
first of all thats an aluminum shift knob , mine is solid stainless steel(way heavier then that POS) second of all mine is $40 shipped without engraving and about The exact same price with engraving (not the stupid shift pattern but a SRT logo or something) 3rd my knob is made by me and im proud of that fact not some second rate machine shop paid for by the hundreds...if you like there knob so much then fine go buy it:thumb:

He has it allready. Ha!

svt2srt4
03-04-2019, 07:27 PM
He has it allready. Ha!
and he also bought mine so ha!:owned:

liteshow
03-04-2019, 07:42 PM
and he also bought mine so ha!:owned:
He also bought a CSC knob from another member awhile back. So he's got quite a collection going.

svt2srt4
03-04-2019, 08:40 PM
He also bought a CSC knob from another member awhile back. So he's got quite a collection going.
wow..that is interesting to say the least...the man likes shift knobs:thumb:

acemp87
03-05-2019, 08:08 PM
mmm, nice knobs lol.

I'd take an engraved one for 40ish bux, the stocker is starting to get on my nerves, how are these held on? any non-polished versions available?

Epix
03-05-2019, 10:11 PM
i would buy an SRT-4 engraved ball in a heartbeat for 50 bucks. trust me you dont need to have 10 people on the list for an engraved one. just look at how well gerry did with his engraved shift knobs. they will sell with out a doubt. that csc ball was one of his he did if im not mistaken. i'd like to see SRT-4 engraged onthe top in the same font as the csc ball a few pages back. i'll send payment once you give us the green light for the engraved shift knobs.

PolarBear
03-05-2019, 10:19 PM
can't you just rip the security of the multiple screws and whatever else from the mpx one and incorporate it into yours, with engraving, I mean hell , if this is a wish list thread, that's what I'd buy without a second thought! the only thing I don't like about the mpx one is that it's got not pizazz

SassySRT
03-05-2019, 10:25 PM
Put me down for an engraved knob. :thumb:

05ocsrt-4
03-05-2019, 10:32 PM
i'd go for an engraved knob

gspeedaddict
03-05-2019, 10:45 PM
can you put a picture of titays on the knob?

Intruudir
03-05-2019, 11:28 PM
and he also bought mine so ha!:owned:



yeah....yours is the one I use as a Paperweight! so ha!:owned:

svt2srt4
03-06-2019, 10:44 AM
yeah....yours is the one I use as a Paperweight! so ha!:owned:
you know lawrence if you dont want the knob send it back to me and ill refund the money and someone that can install a shift knob will buy it for there car:owned:

MSMoores
03-06-2019, 10:45 AM
omg osnapz0rzBBq lol

Needs2Ride
03-07-2019, 11:00 AM
i'd buy an engraved one. Someone should start a list so you know how many people you have willing to pay up.

svt2srt4
03-07-2019, 11:06 AM
i'd buy an engraved one. Someone should start a list so you know how many people you have willing to pay up.
thanks and thats a wonderfull idea...ill do that by noon:thumb:

toothpickdude
03-07-2019, 02:47 PM
put me on the list:thumb:

SassySRT
03-07-2019, 02:49 PM
it's noon, wheres the list lazy ass?

Broken5hift
03-07-2019, 02:51 PM
i just recieved my shift knob from svt

http://www.fakerock.com/images/FRP%20BOULDER.jpg

gspeedaddict
03-07-2019, 02:53 PM
you know lawrence if you dont want the knob send it back to me and ill refund the money and someone that can install a shift knob will buy it for there car:owned:
:rofl: :owned:

svt2srt4
03-07-2019, 02:58 PM
it's noon, wheres the list lazy ass?
i just got on my lunch break you pushy broad:rofl: :rofl:

svt2srt4
03-07-2019, 03:08 PM
ok list started..
/showthread.php?t=3032

JuanDirtyMessican
03-09-2019, 08:49 PM
WTF I voted for YES!!!!

svt2srt4
03-09-2019, 09:36 PM
WTF I voted for YES!!!!
your on the list....i didnt just want to add the people that voted yes, due to some like enough to buy in theory and some like to buy in reality....you be the second type:thumb: way to go:rofl: :rofl:

lowride
05-11-2019, 08:08 AM
still interested, but havent heard anything back........

|