evil_2
10-28-2006, 01:32 AM
http://members.cox.net/04turbosrt4/fuelpump-rewire-instruction.jpg
here's a pic of the 10 gauge wire wrapped in spiral loom.. run it through the fuel/brake line fasteners, there should be a vacant space there.
http://members.cox.net/04turbosrt4/hotwire-from-alt.jpg
here's a pic of the extra ground from the fuel pump to chassis (red 10g wire).. if i had to do it over, i'd wire the ground to the negative post of battery
http://members.cox.net/04turbosrt4/relay-&-chassis-ground.jpg
btw, best way to tap the ground is buy a "chair adapter", plug that to the fuel pump ground (back end of pump) and plug the existing wire to one of the prongs and plug your new ground to the other prong and connect to chassis.. i simply tucked it in the bolt on the park brake cable bracket.
this mod works on the walbro or stock fuel pump. it increases the voltage and ampherage to the pump to make it more efficient= more LPH i used to ping over 16 psi on 91 cali piss gas, now i'm at 18 psi no ping
here's a pic of the 10 gauge wire wrapped in spiral loom.. run it through the fuel/brake line fasteners, there should be a vacant space there.
http://members.cox.net/04turbosrt4/hotwire-from-alt.jpg
here's a pic of the extra ground from the fuel pump to chassis (red 10g wire).. if i had to do it over, i'd wire the ground to the negative post of battery
http://members.cox.net/04turbosrt4/relay-&-chassis-ground.jpg
btw, best way to tap the ground is buy a "chair adapter", plug that to the fuel pump ground (back end of pump) and plug the existing wire to one of the prongs and plug your new ground to the other prong and connect to chassis.. i simply tucked it in the bolt on the park brake cable bracket.
this mod works on the walbro or stock fuel pump. it increases the voltage and ampherage to the pump to make it more efficient= more LPH i used to ping over 16 psi on 91 cali piss gas, now i'm at 18 psi no ping