When you have Dexter axles and a Dexter axle hub cap, proper maintenance is required. Lubrication is one of the more difficult aspects of any motorhome or trailer. Fortunately, if you have a fifth-wheel trailer with Dexter axles, it should come with the Dexter EZ Lube system. Lubricating the bearings will be far easier with this system and doesn’t need to be as frequent either. For instance, Dexter recommends axles are lubricated even twelve thousand miles or once a year. So, how to lubricate Dexter EX Lube axles?
Secure the Trailer
First, you need to find a spot you won’t be disturbed and that is safe to work on the trailer. You want somewhere that offers enough space and for you not to be disturbed every few minutes. This has to be done properly, so you want a quiet place to work in. Next, you should jack up the trailer’s wheels with the appropriate equipment; they should also spin freely off the ground. Everyone has an opinion over what works best for jacking up a trailer, so find what works best for yours and be careful not to damage anything.
Start Greasing
You need to remove the cap that covers the axle fitting and attach the grease gun to the zerk feature. Rotate the wheel and pump the grease until it spills out from the front of the axle.
You should then remove the gun and clean away any excess grease before replacing the cap. This should be repeated on all of the trailer’s wheels. You shouldn’t rush this part or be over-zealous either; take it slow and easy. Remember, you don’t want to damage the Dexter axle hub cap, bearings, or any other component during lubrication.
Lower the Wheels
Once an axle has been greased, you should gently lower it to the ground and do the same for the others. This again, shouldn’t be rushed, otherwise, you could damage the bearings and hub caps unnecessarily. It is important to be careful when you’re working with jacks and stands; you don’t want to use the wrong ones and cause damage to the trailer. You can read more about A How-To Guide to Lubricate a Mounted Bearing by visiting https://www.srtsyndicate.com/a-how-to-guide-to-lubricate-a-mounted-bearing/
The Simple Way to Grease the Axles
The Dexter EZ Lube axles are ideal for those who don’t want to get their hands dirty. You don’t have to do a lot of work and it’s incredibly easy to complete. Of course, this is a task that must be done properly and with due care and attention. If you don’t lubricate the axles sufficiently, it could result in a major problem somewhere down the line. It’s the same if you rush the job and use the wrong tools; problems will occur.
Making Life Simpler for You
Dexter EZ Lube axles are fantastic because they make life easy. Compared to other greasing methods, this ensures lubrication isn’t a chore. It’s simple to lubricate axles; you need to secure the trailer and use the grease gun to attach it to the axles. From there, it’s a piece of cake. Proper maintenance of any trailer is important. Whether you’re replacing a Dexter axle hub cap or regreasing the wheels, take care and be safe. Click here to read about Don’t Let Grease Benefits Slip Away.